| Delivery: 4-6 Weeks |
|
|
|
| Material |
Part Number/Description |
|
E/Barrier |
E/BAR SETS-Slotted = 20"
Bushing/Insulator to bus/cable squirrel barrier with black nylon fasteners with 2 nuts, 2 bolts and 4 washers |
|
E/Energized Barrier |
E/Energized Barrier = 16" |
E/Energized Barrier = 20" |
| E/Energized Barrier = 24" |
|
E/Bus Support Cover |
E/BSC |
| E/XL-BSC |
|
E/Bushing Covers |
E/BUSH CV-Small
Small Size Silicone Cover with 5 push pins
|
| |
E/BUSH CV-Half
Half Size Silicone Cover with 4 push pins |
| |
E/BUSH CV-Full
Full Size Silicone Cover with 8 push pins |
| |
E/BUSH CV-Large
Large Size Silicone Cover with 8 push pins
|
|
E/Bushing Cover Extensions |
E/BC-LG-X-W = Large Size Bushing Cover 1/4 width expansion panel |
| |
E/BC-LG-X-WRA = Large Size Bushing Cover 1/4 width right angle 90° port |
| |
E/BC-LG-X-H = Large Size Bushing Cover extension - Height |
| |
E/BC-LG-X-W/T = Large Size Bushing Cover 1/4 width expansion panel - Top only |
| |
E/BC-LG-X-H/F = Large Size Bushing Cover extension - Height/Filler |
| |
E/BC-LG-X-WRA/CR5 = Large Size Bushing Cover extension width - right angle port Cone-R5 |
| |
E/BC-LG-X-WRA-CAP = Large Size Bushing Cover - Right Angle Port Cap
|
|
E/Fusing Tape |
E/FTP-1.00-G = 1" x 30 mils x 36 ft. |
| |
E/FTP-2.50-G = 2.50" x 30 mils x 36 ft. |
| |
E/FTP-4.00-G = 4" x 30 mils x 36 ft.
|
|
E/PoletopTransformer Bushing Cover |
E/Poletop Bushing Cover
A molded silicone rubber cover with 5 push pins
|
|
E/Poletop Arrestor Cover |
E/Poletop Arrestor Cover
A molded silicone rubber cover with 1 push pin
|
|
E/Poletop Capacitor Cover |
E/Poletop Capacitor Cover
A molded silicone rubber cover with 2 push pins
|
|
E/Termination Cover |
E/Termination Cover
A molded silicone rubber cover with 6 push pins
|
|
E/Universal Cover |
E/Universal Cover
A molded silicone rubber cover with 9 push pins
|
|
E/Pin Insulator Cover |
E/Pin Insulator Cover
A molded silicone rubber cover with 4 push pins
|
|
E/Insulation |
E/INS-0.25-G = 1/4" ID Silicone Rubber Tubing |
| |
E/INS-0.50-G = 1/2" ID Silicone Rubber Tubing |
| |
E/INS-0.75-G = 3/4" ID Silicone Rubber Tubing |
| |
E/INS-1.00-G = 1" ID Silicone Rubber Tubing |
| |
E/INS-1.25-G = 1 1/4" ID Silicone Rubber Tubing |
| |
E/INS-1.75-G = 1 3/4" ID Silicone Rubber Tubing |
| |
E/INS-2.00-G = 2" ID Silicone Rubber Tubing |
| |
E/INS-2.50-G = 2 1/2" ID Silicone Rubber Tubing |
| |
E/INS-3.50-G = 3 1/2" ID Silicone Rubber Tubing |
| |
E/INS-4.50-G = 4 1/2" ID Silicone Rubber Tubing
|
|
E/Angle Bus Cover |
E/ABC-2.50 2 1/2" Silicone Rubber Angle Bus Cover |
| |
E/ABC-3.25 3 1/4" Silicone Rubber Angle Bus Cover |
| |
E/ABC-4.00 4" Silicone Rubber Angle Bus Cover |
|
E/Capacitor Cover |
E/CAP CV-Large = Silicone Rubber Cover |
|
E/Double Lead Cover |
E/Double Lead Cover
A molded two piece silicone rubber cover with 15 push pins |
|
E/Cutout Cover |
E/Cutout Cover
A molded silicone rubber cover for fuse cutouts |
|
E/Getaway Guard |
E/Getaway Guard
Nine component interconnecting spinning molded discs. Applied on overhead getaways to prevent climbing animals like squirrels from entering the substation.
|
|
E/Ground Stud Covers |
E/BRNDY STD-Long = Silicone Rubber Burndy Stud Cover |
|
E/Right Angle Bushing Cover |
E/BUSH CV-RA = Right Angle Silicone Cover with 5 push pins |
|
E/Recloser Bushing Cover |
E/SRVBC = Recloser Vertical Bushing Cover |
|
E/Silicone Push Pins |
E/Push Pins
Silicone Rubber Push Pins for all E/Covers
(Comes in Bags of 50)
|
|
E/Nema Pads |
E/Nema Pads
Silicone Rubber Nema Extrusion |
|
E/Silicone Sheets |
E/SS = 2' x 10' Sheet of Silicone |
|
E/Silicone Sheets (Large) |
E/SS-30 = 30" x 10' Sheet of Silicone |
|
E/Animal Control Strips |
E/ACS-4 = Wire Bird Guard |